FAQs

Q: My boat isn’t reaching the centre roller, how do I adjust it?

Underneath the centre roller is a bolt. You can remove this to lower the centre roller, or you can raise it up a hole to lift the roller higher as needed.

Q: How do I mount the lightboard on my standard trailer?

As standard, the trailer comes with 2 short pins for this purpose. When the trailer isn’t housing the boat, the pins are used to mount the lightboard into the rear risers. Push the risers to a vertical position, and the pin will slide through the hole in both the lightboard and the riser. The 2 spare pins are located next to the long pins in the wheel housing. When the boat is loaded, each fitment is individual to your boat/motor setup, but you may be able to hang it off the back grab rails of your boat. Alternatively, clients have had success using railblaza mounts (available at most camping stores).

Q: My boat isn’t listed on your website. How do I know if it’ll work on your trailer?

A wide variety of boats can be transported on our trailers. We can always make custom tweaks as required to make a setup to suit you. Send us an email with what you’ve got and we’ll go from there.

Q: I can’t find the spare parts I need on your website. Do you carry all the parts for the trailer?

Yes we do. If you can’t find what you need, feel free to give us a call or send us an email and we can help you.

Q: Are your trailers licensable?

Yes they are! Our trailers can be licenced in all states of Australia. We can assist with licencing in WA. For other states, what is required is dependent on your licencing centre, but we are happy to assist you with any paperwork if required.